Free Text Book Test Banks & How to write Article Critique

Question 1:

nursing test bank     

nursing test banks free       

fundamentals of nursing test bank          

nursing school test bank cheating          

nursing test banks all free  

medical surgical nursing test bank          

nursing school test bank    

nursing test bank boost my grade           

nursing test bank info         

boostgrade info nursing test banks

EDUC 625 Journal Article Critique Assignment Instructions

You will analyze and critique a peer reviewed journal article from a professional journal. The article must address the topic of discussion. You must select an article that is less than five years old. Your article critique must include the following:

  • A summary of the author’s position
  • An analysis of the author’s key points and the extent to which it is backed up
  • Application of the article in the classroom
  • Implications to teaching

The assignments must reflect current APA formatting and should include a title page, and reference page. Each journal article critique must be 3  pages in length, not including the title page and reference page.

Choose from the following Topics:

Module: WeekJournal Critique
Module 1: Week 1The Effective Teacher
Module 3: Week 3Classroom Management
Module 6: Week 6Self-Directed Learning

Question 2:

Auto mechanic quesitons some are online. true or false some are multiple choice

Basic Automotive tire service BATS 2

1.       Technicians should let the lug nut spin on the spin on the end of the stud to make sure is completely remove.

2.       The lifting points on some vehicles can be identified by small triangles molded on the rocked panels. True

3.       Standing in the trajectory of the sidewall during the tire inflation process increases the risk of injury if a separation occurs.

4.       Technicians should never use a balancer if the hood has been removed.

5.       The traction point of the entire is the spot where the bead crosses the trim flange during the tire mounting process.

6.       Technicians should never use a balancer if the hood has been removed.

7.       The traction point of the entire is the spot where the bead crosses the trim flange during the tire mounting process.

8.       Protective eyewear is only necessary when using notary tools. False

9.       If the last four number of the Tin or Dot Code are 0811. Then the tire was manufacture in the 8th month of 2011. True

10.   The center of gravity or a rear-wheel drive vehicle is located under the steering column. False

11.   Before unseating the beads of an assembly with a band-mounted sensor the valve stem should be located at the shovel of the tire charging machine.

12.   Failure to clean the mounting surface on the back of the wheel can result in the loss of clamping force.

13.   Which of the following specifications can be found on the vehicles tire placard?

14.   On a two-post above good lift with a maximum capacity of 10,000 pounds, the maximum weight for each arm is?

15.   Technician A says proper torque guarantees proper clamping force when instantly a tire/wheel assembly.

Technician B says torque wrenches should be stored with the wrench at the highest setting. Who is correct?

16.   Puncture repairs are limited to the crown area of the tire with a maximum diameter of ¼ inch.

17.   Light truck tires with steel sidewall plies that are returning to service must be inflated in a restraining device and inspected for a zipper rupture.

18.   Coated wheel weight for aluminum wheels are interchangeable.

19.   If significant movement is detected on more than are lug nut during the torque check, the technician should

20.   Every lift truck tire with steel sidewall plies must be inspected for a zapper rupture before it can be returned to service. True

21.   Injuries small than 1/8 do not require a rubber stem.

22.   The maximum injury angle for a one-piece combination repair is 25.

23.   Lubricant have no effect on the relationship between torque and clamping force

24.   A rim with the identification ship of 16×7 is 16 inches in diameter and 7 inches wide. True

25.   In the tire size 215 155 R17, the 17 represents the Bead diameter in inches.

26.   Which of the following is the correct procedure for snuggling the lug nuts?

27.   When can a nail hole be repaired in the shoulder of the tire?

28.   What does the “T” in the RIST procedure stand for?

29.   Torque is the measurement of twisting force. True

30.   Light truck tires with steel sidewall plies must be completely deflated before they are removed of the inflation is less than 80% of the recommended pressure.

31.   Which of the following areas must be lubricated with approved rubber  lubricant before mounting a tire?

32.   Which of the following will result in the loss of installation torque?

33.   Which of following statement regarding tire mounting is true?

34.   Where should the valve stem be located when demounting a tire.

35.   All bolt circles are measured from the center of one bolt hole to the center of the opposite bolt hole. False

36.   Aluminum wheels should be secured to the machine from the outside of a rim-clamp trim charger.

37.   Which of the following statement regarding tire/wheel assembly removal are true?

38.   Which of the following statement regarding statement balance are true?

39.   The service description in the size represent the

40.   What does the “R” in the RIST procedure stand for? None of the above

41.   It is acceptable to install tire 9.50-16.5 Lt on a 16×8 rim. False

42.   When replacing two tires on a front-wheel drive vehicle, the new tires should be installed on the front axle.

43.   When pin-plate adapters are used to secure the assembly to a between the core is not necessary.

44.   It is acceptable to use a portable floor jack without a jack stand as long as the jack has sufficient capacity to support the weight of the entire vehicle.

45.   Which of the following is are necessary step in the tire repair process?

46.   When installing snow tires on a front-wheel drive vehicle, which of the following statement is true?

47.   Which of the following areas must be inspected as part of the RIST procedure?

48.   In the tire size 215/55/ R17 the 215 represents the

49.   Technician A says all the tires should be inflated to the maximum inflation process molded on the sidewalk and the installed on the vertical. Technician B says all tires should be inflated with an air line assembly that includes a click-on check. Who is correct?

50.   Which of the following statement regarding vulcanizing cement is true? It is acceptable to use a portable floor jack without a jack stand as long as the jack has sufficient capacity to support the weight of the entire vehicle.

Question 3:

Use graphical tools to design the logical and physical layout of the planned e-commerce company’s information systems.

Use graphical tools to illustrate the possible placement of key infrastructure elements with external connectivity (Internet) and internal connectivity (firewalls, LAN).

Develop the bill of materials and tabulate it in a spreadsheet to include item, description, model number, and approximate cost.

Document the methodology and process to include the engineering, furnishing, and installation of the identified inventory.

Use three sources to support your writing.

Question 4:

EST BANK FOR Essential Genetics A Genomic Perspective 4th Edition By Daniel L. Hartl, Elizabeth W. Jones (Study Guide and Solution Manual).pdf (10 MB)

Question 5:

nursing test bank     

nursing test banks free       

fundamentals of nursing test bank          

nursing school test bank cheating          

nursing test banks all free  

medical surgical nursing test bank          

nursing school test bank    

nursing test bank boost my grade           

nursing test bank info         

boostgrade info nursing test banks

[Solved] TEST BANK FOR Essential Cell Biology 4th edition by Bruce Alberts, Dennis Bray, Karen Hopkin


1: CELLS: THE FUNDAMENTAL UNITS OF LIFE
Unity and Diversity of Cells
1-1 Living systems are incredibly diverse in size, shape, environment, and behavior. It is
estimated that there are between 10 million and 100 million different species. Despite this
wide variety of organisms, it remains difficult to define what it means to say something is
alive. Which of the following can be described as the smallest living unit?
(a) DNA
(b) cell
(c) organelle
(d) protein
1-2 Indicate whether the following statements are true or false. If the statement is false,
explain why it is false.
A. The Paramecium is a multicellular microorganism covered with hairlike cilia.
B. Cells of different types can have different chemical requirements.
C. The branchlike extensions that sprout from a single nerve cell in a mammalian
brain can extend over several hundred micrometers.
1-3 For each of the following sentences, fill in the blanks with the best word or phrase
selected from the list below. Not all words or phrases will be used; each word or phrase
should be used only once.
Cells can be very diverse: superficially, they come in various sizes, ranging from
bacterial cells such as Lactobacillus, which is a few __________________ in
length, to larger cells such as a frog’s egg, which has a diameter of about one __________________. Despite the diversity, cells resemble each other to an
astonishing degree in their chemistry. For example, the same 20
__________________ are used to make proteins. Similarly, the genetic
information of all cells is stored in their __________________. Although
__________________ contain the same types of molecules as cells, their inability
to reproduce themselves by their own efforts means that they are not considered
living matter.
amino acids micrometer(s) viruses
DNA millimeter(s) yeast
fatty acids plants
meter plasma membranes
1-4 How does cellular specialization serve multicellular organisms and how might a high
degree of specialization be detrimental?
1-5 The flow of genetic information is controlled by a series of biochemical reactions that
result in the production of proteins, each with its own specific order of amino acids.
Choose the correct series of biochemical reactions from the options presented here.
(a) replication, transcription, translation
(b) replication, translation, transcription
(c) translation, transcription, replication
(d) translation, replication, transcription
1-6 Proteins are important architectural and catalytic components within the cell, helping to
determine its chemistry, its shape, and its ability to respond to changes in the
environment. Remarkably, all of the different proteins in a cell are made from the same
20 __________. By linking them in different sequences, the cell can make protein
molecules with different conformations and surface chemistries, and therefore different
functions.
(a) nucleotides.
(b) sugars.
(c) amino
acids.
(d) fatty acids.
1-7 Which statement is NOT true about mutations?
(a) A mutation is a change in the DNA that can generate offspring less fit for survival
than their parents.
(b) A mutation can be a result of imperfect DNA duplication.
(c) A mutation is a result of sexual reproduction.
(d) A mutation is a change in the DNA that can generate offspring that are as fit for
survival as their parents are.
1-8 Changes in DNA sequence from one generation to the next may result in offspring that are altered in fitness compared with their parents. The process of change and selection
over the course of many generations is the basis of __________.
(a) mutation.
(b) evolution.
(c) heredity.
(d) reproduction.
1-9 Select the option that best finishes the following statement: “Evolution is a process
__________.”
(a) that can be understood based on the principles of mutation and selection.
(b) that results from repeated cycles of adaptation over billions of years.
(c) by which all present-day cells arose from 4–5 different ancestral cells.
(d) that requires hundreds of thousands of years.
1-10 Select the option that correctly finishes the following statement: “A cell’s genome _________________.”
(a) is defined as all the genes being used to make protein.
(b) contains all of a cell’s DNA.
(c) constantly changes, depending upon the cell’s environment.
(d) is altered during embryonic development.
Cells Under the Microscope
1-11 Which statement is NOT true about the events/conclusions from studies during the mid-
1800s surrounding the discovery of cells?
(a) Cells came to be known as the smallest universal building block of living
organisms.
(b) Scientists came to the conclusion that new cells can form spontaneously from the
remnants of ruptured cells.
(c) Light microscopy was essential in demonstrating the commonalities between
plant and animal tissues.
(d) New cells arise from the growth and division of previously existing cells.
1-12 What unit of length plant or animal cell?
would you generally use to measure atypical
(a) centimeters
(b) nanometers
(c) millimeters
(d) micrometers
1-13 Match the type of microscopy on the left with the corresponding description provided
below. There is one best match for each.
A. confocal
B. transmission electron
C. fluorescence
D. phase-contrast
E. scanning electron
F. bright-field
____ uses a light microscope with an optical component to take advantage of the different
refractive indices of light passing through different regions of the cell.
____ employs a light microscope and requires that samples be fixed and stained in order
to reveal cellular details.
____ requires the use of two sets of filters. The first filter narrows the wavelength range
that reaches the specimen and the second blocks out all wavelengths that pass
back up to the eyepiece except for those emitted by the dye in the sample.
____ scans the specimen with a focused laser beam to obtain a series of two-dimensional
optical sections, which can be used to reconstruct an image of the specimen in
three dimensions. The laser excites a fluorescent dye molecule, and the emitted light from each illuminated point is captured through a pinhole and recorded by a
detector.
____ has the ability to resolve cellular components as small as 2 nm.
____ requires coating the sample with a thin layer of a heavy metal to produce three-
dimensional images of the surface of a sample.
1-14 Indicate whether the following statements are true or false. If the statement is false,
explain why it is false.
A. The nucleus of an animal cell is round, small, and difficult to distinguish using
light microscopy.
B. The presence of the plasma membrane can be inferred by the well-defined
boundary of the cell.
C. The cytosol is fairly empty, containing a limited number of organelles, which
allows room for rapid movement via diffusion.
1-15 Cell biologists employ targeted fluorescent dyes or modified fluorescent proteins in both
standard fluorescence microscopy and confocal microscopy to observe specific details in
the cell. Even though fluorescence permits better visualization, the resolving power is
essentially the same as that of a standard light microscope because the resolving power of
a microscope is limited by the __________ of light.
(a) absorption
(b) intensity
(c) filtering
(d) wavelength
1-16 What is the smallest distance two points can be separated and still resolved using light
microscopy?
(a) 20 nm
(b) 0.2 μm
(c) 2 μm
(d) 200 μm
The Prokaryotic Cell
1-17 By definition, prokaryotic cells do not possess __________.
(a) a nucleus.
(b) replication machinery.
(c) ribosomes.
(d)

Question 6:

NUR101 Fundamentals Case Kim Johnson GRQ


Kim Johnson
Guided Reflection Questions
Opening Questions
1. How did the simulated experience of Kim Johnson’s case make you feel?
2. Talk about what went well in the scenario.
Scenario Analysis Questions*
3. PCC What priority problem(s) did you identify for Kim Johnson?
S Identify safety hazards in Kim Johnson’s patient care situation. 
S Identify potential complications from using improper sterile technique during intermittent 
catheterization.
PCC/T&C How would you would correct the nurse’s actions specific to the contamination of the sterile
field?

Question 7:

ATI MATERNAL NEWBORN PROCTORED TEST BANK All Modules with Correct Questions & Answers 2021/2022

ATI MATERNAL NEWBORN PROCTORED TEST BANK 2021/2022
1.    A woman gave birth to a healthy 7-pound, 13-ounce infant girl. The nurse suggests that the client place the infant to her breast within 15 minutes after birth. The nurse is aware that the initiation of breastfeeding is most effective during the first 30 minutes after birth. What is the correct term for this phase of alertness?

First Period of Reactivity

The first period of reactivity is the first phase of transition and lasts up to 30 minutes after birth. The infant is highly alert during this phase. The transition period is the phase between intrauterine and extrauterine existence. The second period of reactivity occurs approximately between 4 and 8 hours after birth, after a period of sleep.

2.    Part of the health assessment of a newborn is observing the infants breathing pattern. What is the predominate pattern of newborns breathing?

Question 8:

BC 3020 Question 1 – Question 1 1.2


A three-year-old is brought to the burn unit after pulling a pot of hot soup off the stove spilling onto to her body. She sustained 18% second degree burns on her legs and 20% third degree burns on her chest and arms. Total body surface area burned is 38%. What ICD-10-CM codes should be reported for the burns (do not include External Cause codes for the accident)? Selected Answer: T21.31XA, T22.30XA, T24.209A, T31.32 Correct Answer: T21.31XA, T22.30XA, T24.209A, T31.32 Response Feedback: ICD-10-CM Coding states to sequence first the code that reflects the highest degree of burn when more than one burn is present. In this case, the burns on her chest and arms are third degree and should be reported first. In the Index to Diseases, look for Burn/chest wall (anterior)/third degree referring you to code T22.30XA; Burn/arm(s)/ third degree guiding you to code T22.30XA; Burn/legs/second degree guiding you to code T24.209A. Refer to ICD-10-CM for instructions on assigning a code from category T31.

Question 9:

TEST BANK FOR Econometric Analysis 5th Edition By William H. Greene

Question 10:

Chapter 1: The History of Health Care in Canada

MULTIPLE CHOICE

     1.   When and where was Canada’s first medical school established?

a.

Saskatoon, in 1868

b.

Ottawa, in 1867

c.

Montreal, in 1825

d.

Kingston, in 1855

ANS:  C

Feedback

A

The first medical school was not established in Saskatoon in 1868.

B

The first medical school was not established in Ottawa in 1867.

C

The first medical school in Canada was established in 1825 in Montreal.

D

The first medical school was not established in Kingston in 1855.

DIF:    Cognitive Level: Knowledge          REF:   p. 4

     2.   In 1834, William Kelly deduced which public health principle?

a.

Vaccination can successfully eradicate smallpox.

b.

Education is directly related to health.

c.

Quarantine effectively contains infections.

d.

Sanitation and disease are related.

ANS:  D

Feedback

A

William Kelly did not deduce that smallpox could be eliminated with a vaccine.

B

William Kelly did not deduce that education level was related to health.

C

William Kelly did not introduce quarantine to contain disease.

D

William Kelly suspected a relationship between sanitation and disease and deduced that water might be a source of contamination.

DIF:    Cognitive Level: Knowledge          REF:   p. 5

     3.   Which of the following volunteer organizations was involved in the evolution of health care in Canada?

a.

The Order of St. John

b.

The Veterans’ Society

c.

The St. Andrew’s Society

d.

The Canadian Nurses Association

ANS:  A

Feedback

A

The Order of St. John was introduced in Canada in 1883; the members had knowledge of first aid, disaster relief, and home nursing.

B

The Veterans’ Society did not play a part in the evolution of health care in Canada.

C

The St. Andrew’s Society did not play a part in the evolution of health care in Canada.

D

The Canadian Nurses Association did not play a part in the early evolution of health care in Canada.

DIF:    Cognitive Level: Knowledge          REF:   p. 6

     4.   What did the Hospital Insurance and Diagnostic Services Act (1957) propose?

a.

Provinces without a health insurance plan must pay additional federal tax.

b.

Provinces and territories with a health insurance plan would receive substantial funding from the federal government.

c.

Certain services would no longer be funded by the federal government.

d.

Physicians would be allowed to charge a fee for service to the client.

ANS:  B

Feedback

A

The Hospital Insurance and Diagnostic Services Act did not propose an increase in tax for provinces without a plan.

B

Under the Hospital Insurance and Diagnostic Services Act (1957), provinces and territories with a health insurance plan would have funding matched by the federal government by 50 cents for every dollar.

C

The Hospital Insurance and Diagnostic Services Act did not propose the removal of insured medical services.

D

The Hospital Insurance and Diagnostic Services Act did not allow physicians to charge a fee for service.

DIF:    Cognitive Level: Knowledge          REF:   p. 13

     5.   What major change in political thinking occurred in post–World War II Canada in relation to health care?

a.

Universities should educate more nurses.

b.

The government should not be required to provide access to primary health care.

c.

Individual families should be responsible for absorbing the cost of health care.

d.

Governments should be responsible for providing basic services like health care.

ANS:  D

Feedback

A

The need to educate more nurses was not part of post–World War II thinking in Canada.

B

The lack of responsibility of the government to provide health care was not part of post–World War II thinking in Canada.

C

The belief that families should bear the cost of health care was not part of the political thinking in post–World War II Canada.

D

In post–World War II Canada, and in the aftermath of a depression, the thinking shifted to the idea that governments had an obligation to provide Canadians with a better standard of living, including access to quality health care.

Question 11:

Test Bank for Cornerstones of Financial Accounting, 3rd Edition Jay Rich Chapter 2—The Accounting Information System Test Bank for Cornerstones of Financial Accounting, 3rd Edition Jay Rich Chapter 2—The Accounting Information System Test Bank for Cornerstones of Financial Accounting, 3rd Edition Jay Rich Chapter 2—The Accounting Information System Test Bank for Cornerstones of Financial Accounting, 3rd Edition Jay Rich Chapter 2—The Accounting Information System Test Bank for Cornerstones of Financial Accounting, 3rd Edition Jay Rich Chapter 2—The Accounting Information System Test Bank for Cornerstones of Financial Accounting, 3rd Edition Jay Rich Chapter 2—The Accounting Information System

Question 12:

ECO 204 Week 5 Final Paper Education and Income Inequality

Education and Income Inequality [WLO: 3] [CLOs: 1, 2, 3, 4, 5, 6, 7] Prior to beginning work on the Final Paper, read Steven Strauss’ article, The Connection Between Education, Income Inequality, and Unemployment. In your Final Paper, you should address the following based on the information presented in the article and other research: Describe how a country can measure its income inequality. Evaluate the effect of income inequality on the U.S. economy, such as unemployment, economic growth, and other economic factors. Estimate the gap between those who hold bachelor’s and higher (master or doctoral) degrees and those who do not. Explain reasons why the inequality gap between educated and less-educated workers has been widening. Evaluate whether increasing opportunities for higher education can reduce income inequality. Analyze what else causes U.S. income inequality to widen. Recommend how to reduce educationally based income inequality or other factors if you were a federal policy maker. The Education and Income Inequality Final Paper Must be 10 to 12 double-spaced pages in length (not including title and references pages) and formatted according to APA style as outlined in the Ashford Writing Center’s APA Style resource. Must include a separate title page with the following: Title of paper Student’s name Course name and number Instructor’s name Date submitted For further assistance with the formatting and the title page, refer to APA Formatting for Word 2013. Must utilize academic voice. See the Academic Voice resource for additional guidance. Must include an introduction and conclusion paragraph. Your introduction paragraph needs to end with a clear thesis statement that indicates the purpose of your paper. For assistance on writing Introductions & Conclusions as well as Writing a Thesis Statement, refer to the Ashford Writing Center resources. Must use at least five scholarly, peer-reviewed, and/or other credible sources in addition to the course text. The Scholarly, Peer-Reviewed, and Other Credible Sourcestable offers additional guidance on appropriate source types. If you have questions about whether a specific source is appropriate for this assignment, please contact your instructor. Your instructor has the final say about the appropriateness of a specific source for a particular assignment. Must document any information used from sources in APA style as outlined in the Ashford Writing Center’s Citing Within Your Paper guide. Must include a separate references page that is formatted according to APA style as outlined in the Ashford Writing Center. See the Formatting Your References List resource in the Ashford Writing Center for specifications. Carefully review the Grading Rubric for the criteria that will be used to evaluate your assignment.

Question 13:

CLC 056 Exam questions and answers_ CLC 056 Analyzing Contract Costs Exam (2021)

CLC 056 Analyzing Contract Costs Exam

Econ1203 quiz bank/Econ1203 quiz bank.

TEST BANK FOR Essential Genetics A Genomic Perspective 4th Edition By Daniel L. Hartl

JPK SHAC 4033 ICS: Valuation and Financing of Lady M – GROUP 1: University of Technology Malaysia

The Valuation and Financing of Lady M – GROUP 1: University of Technology Malaysia

JPK SHAC 4033 ICS: The Valuation and Financing of Lady M – GROUP 1: University of Technology Malaysia

Question

The valuation and Financing of Lady M Confections The valuation and Financing of Lady M Confections Lady M Confections is a cake wholesale business company. Founded in May 2001. Open their second bakery in 2012 in The Plaza Food Hall in New York City. Sold cakes to upscale restaurants and luxury hotels in New York City. Opened a third shop in New York City and one in Los Angeles. Had licensed in both Singapore and South Korea. Signature dessert is called as ‘Mille Crepe’ SUMMARY Featured in Oprah Magazine twice in one year and attracted the attention of many celebrities. Investors want to expand the Lady M brand to Asia and the Middle East. Offered $10M dollars line of credit in exchange for an equity stake in the company. Exclusive franchising rights in China. Romaniszyn considers to opening a new boutique in the new World Trade Center. Annual rent for that location was $310,600. Decide to choose whether World Trade Center location or Chinese investor’s offer. In terms of breakeven analysis, profit and all related to the growth and benefits of the company.

Question 14:

TEST BANK for Managerial Economics

1. Managerial economics uses ____________ to help managers solve problems.
a. formal models
b. prescribed behavior
c. quantitative methods
d. microeconomic theory
e. all of the above
ANS: E PTS: 1
2. Managerial economics draws upon all of the following EXCEPT:
a. finance
b. microeconomics
c. accounting
d. marketing
e. sociology
ANS: E PTS: 1
3. The economic theory of the firm assumes that the primary objective of a firm’s owner or
owners is to:
a. behave in a socially conscientious manner
b. maximize the firm’s profit
c. maximize the firm’s total sales
d. maximize the value of the firm
e. All of these are primary objectives
ANS: D PTS: 1
O
O
O
Chapter 1: Introduction 2
4. If the annual interest rate is i, the present value of $X to be received at the end of each of the
next n years is:
a. $X/i
b. $X/(1 + i)n
c. 􀂦 =
+
n
t
X i t
1
$ 1/(1 )
d. $X[(1 + i)n] / [ i(1 + i)n – 1]
e. $X / [i(1 + i)n – 1]
ANS: C PTS: 1
5. If the annual interest rate is i, the present value of $X to be received at the end of each future
year forever is:
a. $X/(1 + i)
b. $X/i
c. $X/(1 + i)n
d. $X/i n
e. $Xn/i n
ANS: B PTS: 1
6. If the annual interest rate is 25 percent, the present discounted value of $100 to be received in
one year is:
a. $75
b. $80
c. $100
d. $120
e. $125
ANS: B PTS: 1
O
Chapter 1: Introduction 3
7. You’ve just won the $25 million lottery. You are going to receive a check for $1 million today
and at the end of every year for the next 24 years. If the interest rate is 10 percent, the present
value of your prize is:
a. $8,984,744
b. $9,984,744
c. $12,984,744
d. $20,000,000
e. $25,000,000
ANS: A PTS: 1
8. You borrow money from Fast Eddie’s Fast Cash at 20 percent per year interest and agree to
pay $500 at the end of each of the next four years. You must have borrowed approximately:
a. $2,000
b. $1,595
c. $1,295
d. $1,095
e. $895
ANS: C PTS: 1
9. You buy your child a $100 savings bond that matures in 10 years and pays an annual interest
rate of 10 percent. At maturity the bond will be worth:
a. $228.17
b. $200
c. $259.37
d. $271.17
e. $217.71
ANS: C PTS: 1
Chapter 1: Introduction 4
10. Your mortgage requires that you pay $12,000 at the end of each of the next 30 years. If the
annual interest rate is 12 percent, then you must have borrowed approximately:
a. $117,660
b. $96,660
c. $78,660
d. $63,660
e. $133,660
ANS: B PTS: 1
11. The present value of expected future profits will _____ if the discount rate increases and will
_____ if expected future profits increase.
a. increase; not change
b. increase; increase
c. not change; decrease
d. decrease; increase
e. decrease; decrease
ANS: D PTS: 1
12. If the annual interest rate is i, the present value of a payment of $X to be received n years from
now is:
a. $X/(1 + i)
b. $X/i
c. $X/(1 + i )n
d. $X/i n
e. none of the above
ANS: C PTS: 1
Chapter 1: Introduction 5
13. In managerial economics, managers are assumed to maximize:
a. current profits
b. their take-home pay
c. their employees’ welfare
d. the value of their firm
e. social welfare
ANS: D PTS: 1
14. Owner-supplied labor is a cost that is usually:
a. included in both accounting costs and economic costs
b. included in accounting costs but not in economic costs
c. included in economic costs but not in accounting costs
d. not included in either accounting costs or economic costs
e. ignored because it is impossible to place a value on it
ANS: C PTS: 1
15. What is the relationship between economic and accounting profit?
a. Economic profit is equal to accounting profit.
b. Economic profit is greater than accounting profit.
c. Economic profit is less than accounting profit.
d. Economic profit may be equal to or less than accounting profit.
e. Economic profit may be equal to or greater than accounting profit.
ANS: D PTS: 1
Chapter 1: Introduction 6
16. The difference between accounting and economic profit is:
a. caused by confusion over tax laws
b. the value of owned resources in their next best alternative use
c. the result of superior training received by accountants
d. proportionately very small for owner-managed firms
e. a decreasing function of interest rates

Question 15:

BUS 5111 Unit 3 Written Assignment

Guide to the assignment on Net Present Value (NPV) and tax implications. Submit a 3-4 page written paper following the APA format, exclusive of the title and reference pages. The Abstract is not required or needed. Papers should be double spaced in Times New Roman font and 12 point size. The paper must cite at least one other validated (peer-reviewed) source independent of the textbook. In this paper, please discuss the following case study. For you to complete this assignment you must: • Explain your approach to the problem. • Support your approach with references, and execute your approach. • Provide an answer to the case study’s questions with a recommendation. This case continues following the new project of the WePROMOTE Company, that you and your partner own. WePROMOTE is in the promotional materials business. The project being considered is to manufacture a very unique case for smartphones. The case is very durable, attractive and fits virtually all models of smartphone. It will also have the logo of your client, a prominent, local company and is planned to be given away at public relations events by your client. As we know from the prior case involving this company, more details of the project become apparent and with more precision and certainty. The following are the final values to the data: • The cost of the equipment will be $70,000 and this cost is incurred prior to any cash is received by the project. • The expected annual cash revenue of the project will be $30,000. • The expected annual cash outflows (expenses/costs) are estimated at being $11,000, excluding depreciation. • Your tax rate is 30% and you plan to depreciate the equipment on a straight-line basis for the life of the equipment. The discount rate you are assuming is 6%. • After 5 years the equipment will stop working and there will be no salvage value. Requirements of the paper: • Perform the final NPV calculations and provide a narrative on how you calculated the computations and why (justification of answer). • Present your calculated answers in schedule format (a table) along with your narrative. Microsoft Excel is also recommended for calculating and creating a table (your schedule). • Then provide a summary conclusion on whether you should continue to pursue this business opportunity. • Research, using at least one other sources other than the textbook materials that support your calculations and conclusions. Papers will be assessed on the following criteria: • Provide the final, accurate NPV calculations. • A narrative on how the NPVs were calculated. The narrative should include how the data relating to depreciation and its tax consequences affect the cash flow of the project. Include a table with your analysis to present your work. • Provide a conclusion on whether this business opportunity should be pursued.

Question 16:

MGMT 410 Chapter 3 Homework. McNeese State University

MGMT 410 Chapter 6 Homework. McNeese State University

MGMT 410 Chapter 10 Homework. McNeese State University

MGMT 410 Chapter 5 Homework. McNeese State University

MGMT 410 Chapter 9 Homework. McNeese State University

HRM 587 Final Exam (Latest): Devry University

BIS245 Week 8 Final Exam (Spring 2018 & 2019): DeVry University

BIS155 Final Exam Submission: Car Parts Service, Music On Demand and Super Shoes: DeVry University

ACCT212 Financial Accounting (Accounting Terms and Definitions): DeVry University, Chicago

Question 17:

BUS 210 Module 5 Socially Responsible Practice Recommendations

Overview

Imagine that you have been hired as a consultant to investigate the social responsibility of two companies, TOMS Shoes and The Body Shop. Your manager finds both of these companies to be inspirational. She would like the SNHU Pet Supply Company to become more socially conscious and has asked you to investigate what Toms and The Body Shop are doing. You are responsible for researching how their socially responsible practices impact both the companies and their customers. Your manager would like you to make some suggestions about how the SNHU Pet Supply Company can become more socially responsible and make ethical decisions.

Prompt

You will create an opinion brief about the two companies and suggest a social change for your company. Be sure to use evidence from the course (such as the definition of social responsibility found in your readings) to support your response and suggestions.

Specifically, you must address the following rubric criteria:

  • Socially Responsible Efforts: Describe each company’s efforts to promote ethical and social good.
  • Benefits: Describe the organizational benefits from adopting socially conscious policies.
  • Socially Responsible Policy: Suggest one socially responsible policy that the SNHU Pet Supply Company could put into place, and explain how this would benefit the company and its consumers.

Guidelines for Submission

Submit your brief as a one-page Word document using 12-point Times New Roman, one-inch margins, and double spacing. Sources should be cited according to APA style.

Question 18:

TECH 7401 LEADERSHIP IN IT PROJECT MANAGEMENT


Overview
The purpose of the oral presentation is to provide an opportunity for students to explore the contributions to society
and/or business of a successful leader and share this knowledge while practicing their verbal communication skills.
Timelines and Expectations
Percentage Value of Task: 10% (15 marks)
Due: Presentation and Slides – in Week 4 timetabled seminar/tutorial
Minimum time expectation: Preparation for this task will take approximately 10 hours
Learning Outcomes Assessed
The following course learning outcomes are assessed by completing this assessment:
K5. Research and critique current and future issues in IT project management in a global context.
S2. Demonstrate theoretical and practical implementation of leadership, team building, and performance
management approaches for IT projects.
A1. Construct written and verbal approaches to developing and presenting IT project
documentation

Question 19:

ASSESSMENT DETAILS SIT718 Real World Analytics

ASSESSMENT DETAILS

SIT718 Real World Analytics

Assessment Task 2: Problem solving task 1

Assignment (a report in pdf format, software code and/or data) must be submitted via the assignment dropbox in the unit site (accessed in DeakinSync)

No e-mail or hardcopy submissions are accepted.

Extension requests

Requests for extensions should be made to Unit/Campus Chairs well in advance of the assessment due date. If you wish to seek an extension for an assignment, you will need to apply by email directly to Prof. Maia Angelova (maia.a@deakin.edu.au), as soon as you become aware that you will have difficultyin meeting the scheduled deadline, but at least 3 days before the due date. When you make your request, you must include appropriate documentation (medical certificate, death notice) and a copy of your draft assignment.

Conditions under which an extension will normally be approved include:

Medical To cover medical conditions of a serious nature, e.g. hospitalisation, serious injury or chronic illness. Note: Temporary minor ailments such as headaches, colds and minor gastric upsets are not serious medical conditions and are unlikely to be accepted. However, serious cases of these may be considered.

Compassionate e.g. death of close family member, significant family and relationship problems.

Hardship/Trauma e.g. sudden loss or gain of employment, severe disruption to domestic arrangements, victim of crime. Note: Misreading the timetable, exam anxiety or returning home will not be accepted as grounds for consideration.

Special consideration

You may be eligible for special consideration if circumstances beyond your control prevent you from undertaking or completing an assessment task at the scheduled time.

See the following link for advice on the application process:

http://www.deakin.edu.au/students/studying/assessment-and-results/special-consideration

Assessment feedback

Students will receive written feedback and model solutions to aid reflection and analysis of problem strategies and solutions for consideration in the upcoming problem-solving task during the week beginning Monday 17 December 2018

Referencing

You must correctly use the Harvard method in this assessment. See the Deakin referencing guide .

Academic integrity, plagiarism and collusion

Plagiarism and collusion constitute extremely serious breaches of academic integrity. They are forms of cheating, and severe penalties are associated with them, including cancellation of marks for a specific assignment, for a specific unit or even exclusion from the course. If you are ever in doubt about how to properly use and cite a source of information refer to the referencing site above.

Plagiarism occurs when a student passes off as the student’s own work, or copies without acknowledgement as to its authorship, the work of any other person or resubmits their own work from a previous assessment task.

Collusion occurs when a student obtains the agreement of another person for a fraudulent purpose, with the intent of obtaining an advantage in submitting an assignment or other work.

Work submitted may be reproduced and/or communicated by the university for the purpose of assuring academic integrity of submissions: https://www.deakin.edu.au/students/study-support/referencing/academic-integrity

© Deakin University 2 FutureLearn

ASSESSMENT DETAILS

SIT718 Real World Analytics

Assessment Task 2: Problem solving task 1

The aim of this assignment is to analyse the behaviour and performance of share prices of one company, from the listed five companies below, using historic data and the stochastic model given below.

Companies:

• Australia and New Zealand Banking Group ANZ.AX

• National Australian Bank Limited (NAB.AX)

• Medibank Private Limited (MPL.AX)

• British Petrolium p.l.c. (BP)

• GlaxSmithKline plc (GSK)

Collect the closing share price data for this company for each trading day for 3 consecutive months, from 1 August 2018 to 31 October 2018 inclusive.

(10 marks)

© Deakin University 3 FutureLearn

ASSESSMENT DETAILS

SIT718 Real World Analytics

Assessment Task 2: Problem solving task 1

3. State the condition that share prices have to satisfy in order to be represented by a geometric Brownian motion? Does your data satisfy this condition? Check using appropriate statistical test and present your evidence in a suitable tabular format.

4.  Compute   and

(10 marks)

for your data assuming that they are both constant. You are

encouraged to research the literature about   and

and find appropriate

formulas to compute their values from the three months historic data.

(20 marks)

5. Find information publicly available for your company, e.g. report and news releases.

Using this information about the company, critically appraise the computed

values of and .

(10 marks)

6. Estimate the expected value of the share price on 16 November 2018 and compare with published data.

(10 marks)

7. In the light of your findings, state the possible restrictions of your model.

Write a short report (up to 250 words) about your company using your research, model and results.

(20 marks)

8. Presentation

(10 marks)

Presentation will be assessed for style and grammar, presentation of mathematics, graphs, tables and references. You should not exceed the 7 A4 sides page limit (including figures, tables, appendices and references).

List and quote in the text the references used, including books, articles and web resources.

Note: Questions 1,3,4, 5 and 7 require independent learning and research.

.

END OF COURSEWORK ASSESSMENT

Question 20:

ACCT212 Financial Accounting (Accounting Terms and Definitions): DeVry University, Chicago

Concordia University FINA 230 Final Exam (questions & answers)

Western University MOS 2310>Chapter 14 Cost of Capital

Question 21:

Western University Microeconomic Policy Ch. 3 Practice Questions with answers


From EconomicsMicroeconomics

Microeconomic Policy
Practice Questions
Monopoly
11.12 a) With demand 
P Q = – 210 4 , MR Q = – 210 8
. Setting 
MR MC =
implies
210 8 10
25
Q
Q
– =
=
With 
Q = 25
, price will be 
P Q = – = 210 4 110
. At this price and quantity total 
revenue will be 
TR = = 110(25) 2,750.
b) If 
MC = 20
, then setting 
MR MC =
implies
210 8 20
23.75
Q
Q
– =
=
At 
Q = 23.75
, price will be 
P =115
. At this price and quantity total revenue will 
be 
TR = = 115(23.75) 2,731.25
. Therefore, the increase in marginal cost will 
result in lower total revenue for the firm.
c) Competitive firms produce until P = MC, so in this case we know the market 
price would be P = 10 and the market quantity would be:
210 4 10
50
Q
Q
– =
=
d) In this case, the market price will be
P MC =
= 20, implying that the industry 
quantity is given by
210 4 20
47.50
Q
Q
– =
=
At this quantity, price will be 
P = 20
. When 
MC =10
, total industry revenue is
10(50) 500 =
. With 
MC = 20
, total industry revenue is 
20(47.50) 950 =
. Thus, 
total industry revenue increases in the perfectly competitive market after the 
increase in marginal cost

Question 22:

Snow avalanches can be a real problem for travelers in the western United States

Snow avalanches can be a real problem for travelers in the western United States and Canada. A very common type of avalanche is called the slab avalanche. These have been studied extensively by David McClung, a professor of civil engineering at the University of British Columbia. Suppose slab avalanches studied in a region of Canada had an average thickness of μ = 68 cm. The ski patrol at Vail, Colorado, is studying slab avalanches in its region. A random sample of avalanches in spring gave the following thicknesses (in cm).

59  51  76  38  65  54  49  62

68  55  64  67  63  74  65  79

(i) Use a calculator with sample mean and standard deviation keys to find x and s. (Round your answers to two decimal places.)

x=cm

s=cm


(ii) Assume the slab thickness has an approximately normal distribution. Use a 1% level of significance to test the claim that the mean slab thickness in the Vail region is different from that in the region of Canada.

(a) What is the level of significance?


State the null and alternate hypotheses.

H0μ < 68; H1μ = 68H0μ = 68; H1μ ≠ 68    H0μ ≠ 68; H1μ = 68H0μ = 68; H1μ > 68H0μ = 68; H1μ < 68


(b) What sampling distribution will you use? Explain the rationale for your choice of sampling distribution.

The Student’s t, since we assume that x has a normal distribution and σ is unknown.

The Student’s t, since we assume that x has a normal distribution and σ is known.    

The standard normal, since we assume that x has a normal distribution and σ is unknown.

The standard normal, since we assume that x has a normal distribution and σ is known.


What is the value of the sample test statistic? (Round your answer to three decimal places.)


(c) Estimate the P-value.

P-value > 0.2500.100 < P-value < 0.250    0.050 < P-value < 0.1000.010 < P-value < 0.050P-value < 0.010


Sketch the sampling distribution and show the area corresponding to the P-value.


(d) Based on your answers in parts (a) to (c), will you reject or fail to reject the null hypothesis? Are the data statistically significant at level α?

At the α = 0.01 level, we reject the null hypothesis and conclude the data are statistically significant

.At the α = 0.01 level, we reject the null hypothesis and conclude the data are not statistically significant.    

At the α = 0.01 level, we fail to reject the null hypothesis and conclude the data are statistically significant.

At the α = 0.01 level, we fail to reject the null hypothesis and conclude the data are not statistically significant.


(e) Interpret your conclusion in the context of the application.

There is sufficient evidence at the 0.01 level to conclude that the mean slab thickness in the Vail region is different from that in the region of Canada.

There is insufficient evidence at the 0.01 level to conclude that the mean slab thickness in the Vail region is different from that in the region of Canada. 

Question 23:

A survey conducted at a mid-western university and involving 1,500 students


A survey conducted at a mid-western university and involving 1,500 students found that 68% had taken out a student loan to help pay for the cost of their college education. A similar study at a southeastern university in which 2,000 students were surveyed found that 47​% had taken out a student loan.
 

a. Develop and interpret a 95% confidence interval estimate for the difference in the proportions of students who have loans at these two universities.

b. Using an alpha level of 0.05, test the hypothesis that there is no difference in the proportions of students at these two universities who have loans. How does this test compare with the result you found in part​ a?

Question 24:

ETHC445N Week 8 Final Exam & ETHC445 Wk 8 FINAL EXAM (Latest): DeVry University

SOCW 6101 WEEK 3 ASSIGNMENT/SOCW 6101 WEEK 3 ASSIGNMENT

INTRODUCTION TO SOCIOLOGY – MILESTONE 3 (SOPHIA PATHWAY)


Test Bank for Sociology A Global Perspective 8th Edition by Ferrante

Test Bank for Sociology A Global Perspective 8th Edition by Ferrante

Test Bank for Sociology A Global Perspective 8th Edition by Ferrante


TEST BANK FOR MACIONIS AND GERBER, SOCIOLOGY, NINTH CANADIAN EDITION

TEST BANK FOR MACIONIS AND GERBER, SOCIOLOGY, NINTH CANADIAN EDITION

TEST BANK FOR MACIONIS AND GERBER, SOCIOLOGY, NINTH CANADIAN EDITION

TEST BANK FOR KIMMEL AND ARONSON SOCIOLOGY NOW The Essentials Prepared by Elizabeth Pare

TEST BANK SOCIOLOGY IN OUR TIMES The Essentials 8TH EDITION BY DIANA KENDALL

TEST BANK SOCIOLOGY IN OUR TIMES The Essentials 8TH EDITION BY DIANA KENDALL

TEST BANK SOCIOLOGY IN OUR TIMES The Essentials 8TH EDITION BY DIANA KENDALL


Test Bank for Sociology A Global Perspective 8th Edition by Ferrante 674 PAGES/Test Bank for Sociology A Global Perspective 8th Edition by Ferrante 674 PAGES/Test Bank for Sociology A Global Perspective 8th Edition by Ferrante 674 PAGES

TEST BANK FOR MACIONIS AND GERBER, SOCIOLOGY, NINTH CANADIAN EDITION 477 PAGES/TEST BANK FOR MACIONIS AND GERBER, SOCIOLOGY, NINTH CANADIAN EDITION 477 PAGES

INTRODUCTION TO SOCIOLOGY TEST BANK: SOC 203 (CHAPTER 1-22) COMPREHENSIVE SOLUTIONS


INTRODUCTION TO SOCIOLOGY TEST BANK: SOC 203

(CHAPTER 1-22)

COMPREHENSIVE SOLUTIONS

Chapter 1: Sociology: An Introduction

MULTIPLE CHOICE

1.                  The ability to both participate in social life and to analyze the broader meanings of what is occurring is known as

a.

social analysis

b.

sociological imagination

c.

social conditioning

d.

sociological examination

ANS: B                   REF:   3                    OBJ: 1

2.                  The realities of life that we create as social beings are called

a.

social examinations

b.

social realities

c.

social facts

d.

social conditions

ANS: D                   REF:   3                    OBJ: 1

3.                  Which of the following would NOT be considered a social condition?

a.

drug use

b.

Wealth

c.

Deafness

d.

Crime

ANS: C                   REF:   3                    OBJ: 1

 How to Critique an Article: The Main Steps

This form of assignment is naturally challenging and rather confusing. It is no wonder why students may begin to feel overwhelmed with figuring out how to write an article critique.

To help you get your task done with ease, we have prepared a simple 3-step guide on how to summarize and critique an article:

Step 1: Reading the Article

First of all, to critique the article, you need to read it carefully. For a better outcome, it is recommended to read the piece several times—until you fully understand the information presented in it. Next, you need to address the following questions:

1. Why is the article’s author considered an expert in their field?
What makes a particular author’s opinion sound valid? Is the author knowledgeable about the topic? What do other field experts say about the author? Is the article’s author covered in academic praise or not taken seriously?

2. What is the author’s thesis/hypothesis?
What is the main message the author is trying to convey? Is this message clear? Or are there just plenty of general phrases without any specific details?

3. Who is the article’s target audience?
Is the article geared towards a general audience? Or does it appeal to a specific group of people and use language that is only understandable to that audience?

4. Are the arguments presented valid?
Are the sources used by the author from all over the place? Does it seem like some sources are taken from places that share a cult-like vocabulary?

5. What are the logical fallacies in the author’s viewpoint?
Are there any logical blindspots? How much do they affect the outcome?

6. Is the conclusion clear and logical?
Did the author arrive at a clear outcome in his or her work?

Found Yourself in a Situation Where You Type “PLEASE WRITE MY ESSAY”?

Professional writing help is right here.

Step 2: Collecting Proof

The first step will help you read and understand the piece, look at it from a critical point of view, and reflect upon it. Now, when you have an idea about which way you should be heading in your critique paper, it is the time to start gathering evidence. Here are the main steps you should undertake:

1. Define Whether the Author Is Following Formal Logic
One of the key things to look for when writing an article critique is the presence of any logical fallacies. Establishing that the author’s general idea follows logic is not easy, but it is an essential step to coping with the task.

Often, undereducated people have some common logical fallacies. An example of this is to accept certain information based on the feelings and/or emotions it evokes, rather than focusing on the supporting arguments.

Here is a list of some common examples of logical fallacies with brief explanations of each:

  • Ad hominem – when the author attacks someone who is expressing an opinion with the goal to discredit the other’s point of view.
  • Slippery Slope – when the author claims that an action will always end up to be the worst possible scenario.
  • Correlation vs. Causation – when the author concludes that since actions 1 and 2 occurred one after the other, then action 2 must be the effect of action 1. The problem with such a statement is mostly because the author draws conclusions about the correlation between the two actions without looking deeper to see the real causes and effects.
  • Wishful Thinking – when the author believes something that is not backed up by any proof. This issue typically occurs when someone believes the given information is true because it makes them feel good.

2. Search for Any Biased Opinions in the Article
Another step is to evaluate the piece based on the presence of biased opinions. The thing is that people often pick sides of an argument based on the outcomes rather than the evidence. If the outcome makes them feel bad in any way, they can search for any proof that would discredit it and, thus, make them feel better.

Step 3: Formatting Your Paper

Just like any other written assignment, a critique paper should be formatted and structured properly. A standard article critique consists of four parts: an introduction, summary, critique, and conclusion. Below is a clear checklist to help you grasp the idea of how a good paper should be formatted:

How to Critique a Journal Article

So, you were assigned to write a critique paper for a journal article? If you are not sure where to start, here is a step-by-step guide on how to critique a journal article:

How to Critique a Research Article

If you are wondering how to critique a research article in particular, below we’ve outlined the key steps to follow.

Before you start writing:

While reading:

  • Define how qualified the author is on the chosen topic. What are the author’s credentials?
  • Reflect on the research methods used. Are the methods the author chose appropriate and helpful for answering the stated research question(s)?
  • Evaluate the results. Are there any signs of the generalizability of the outcomes?
  • Look for any bias in the article. Is there any conflict of interest or proof of bias?
  • Define the overall quality of the research work. Does the article seem relevant or outdated?
  • Pay attention to the sources used. Did the sources back up their research with theory and/or previous literature related to the topic?

Struggling to find the strong and weak points that can shape your critique? Here is a simple checklist to help you understand what to critique in a research article (separated by sections):

Introduction

1. Problem

  • Does the author make a problem statement?
  • Does the problem statement correspond with the focus of the study?
  • Is the problem stated researchable?
  • Does the author provide background information regarding the problem?
  • Does the author discuss the significance of the problem?
  • Does the author mention variables and their correlations?
  • Does the author have decent enough qualifications to perform this particular study?

2. Review of the Relevant Literature

  • Is the review of literature comprehensive?
  • Are all references cited properly?
  • Are most of the sources used by the author primary sources?
  • Did the author analyze, critique, compare, and contrast the references and findings contained in them?
  • Does the author explain the relevancy of his or her references?
  • Is the literature review well organized?
  • Does the review competently inform the readers about the topic and problem?

3. Hypothesis

  • Does the author specify key research questions and hypotheses?
  • Is every hypothesis testable?
  • Are all hypotheses and research questions clear, logical, and accurate?

Method

1. Participants

  • Does the author describe the size and main characteristics of participant groups?
  • If there is a sample selected, does the author specify its size and characteristics?
  • Is there enough information on the method of selecting a sample used by the author?
  • Are there any limitations or biases in the manner the author selected participants?

2. Instruments

3. Design and Procedures

Results

As you go through all of these steps, you can transition to writing. When writing your critique paper, you should make a critical evaluation of the research article you have read and use the evidence collected from the piece. To help you structure your research article critique properly, here is a sample outline of a critique of research for the article The Effects of Early Education on Children’s Competence in Elementary School:

1. Bibliographic Information

  • Author(s): M. B. Bronson, D. E. Pierson & T. Tivnan
  • Title: The Effects of Early Education on Children’s Competence in Elementary School
  • Year of publication: 1984
  • Source: Evaluation Review, 8(5), 143-155

2. Summary of the Article

3. Critique

  • Possible Threats to the Internal Validity
  • History: Was not controlled as the comparison children may have not spent their entire lives in the same area as the treatment students.
  • Maturation: Controlled. Students were matched by gender and grade.
  • Testing: The observers recorded students’ behaviors within 3-to-6 week periods. This fact may have influenced their behaviors.
  • Instrumentation: The tool used may have been a subject to bias from the observers’ perspective.
  • Selection bias: All selected students volunteered to participate in the study. Thus, the findings could be affected by self-selection.
  • Experimental mortality: Students who left the area were still tracked as a part of the treatment group, though they should have been evaluated separately.
  • Design contamination: It is possible that children in the comparison group learned skills from the students in the treatment group since they all were from the same classroom.
  • Possible Threats to External Validity
  • Unique features of the program: The program was available both for community residents and non-residents.
  • Experimental arrangements: Brooklin is an affluent community, unlike many others.

4. Conclusion

  • Is the reviewed article useful?
  • Does it make sense?
  • Do the findings of the study look convincing? Explain.
  • Does the study have any significance and/or practical value for its respective field of science?

Video Guide: How to Write an Article Critique

4.                  Which of the following sociologists is credited with making the term sociological imagination famous?

a.

Emile Durkheim

b.

George Ritzer

c.

Auguste Comte

d.

Wright Mills

ANS: D                   REF:   4                    OBJ: 3

5.                  Which of the following terms was used by C. Wright Mills to refer to the process by which human beings see the links between their own individual biographies and the course of human history?

a.

sociological consciousness

b.

sociological environmentalism

c.

the sociological challenge

d.

the sociological imagination

ANS: D                   REF:   4                    OBJ: 1

6.                  By using the sociological imagination individuals can:

a.

allow for a more scientific approach to the study of human events

b.

give citizens a greater say in public policy making

c.

give governments greater control over society

d.

gain wisdom about the society in which we live

ANS: D                   REF:   4                    OBJ: 1

7.                  The scientific study of human societies and human behavior in the many groups that make up a society is called:

a.

economics

b.

psychology

c.

social psychology

d.

sociology

ANS: D                   REF:   5                    OBJ: 1

8.                  From a sociologist’s perspective, social conditions in general can best be described as

a.

the social environment

b.

our perception of the way life is

c.

realities of life we create as human beings

d.

how people respond to their environment

ANS: C                   REF:   3                    OBJ: 1

9.                  Beth Johnson graduated with a law degree from her state university. For the past six months she has been trying to get a job but has met with little success. She notes that most of her friends who graduated at the same time are also as yet unemployed. Johnson has concluded that her inability to obtain suitable employment is the result of poor economic conditions. According to C. Wright Mills, her conclusion is an example of:

a.

personal resignation

b.

sociological imagination

c.

structural unemployment

d.

technological displacement

ANS: B                   REF:   4                    OBJ: 1

10.              Sociologists are continually seeking knowledge about

a.

individual behavior

b.

human psychology

c.

animal behavior

d.

differences in the behaviors of entire societies

ANS: D                   REF:   5                    OBJ:   1                    NOTE: Web Quiz

SOC 200 Case Study Report 1 THREE JAYS CORPORATION


1. Using the data in case Exhibit 4 and the 2012 annual demand, calculate the EOQ and ROP
quantities for the five SKUs scheduled to be produced in the last week of June. How do these
amounts compare with those calculated in 2011? Compare the increases in EOQs with the increases
in annual demand. (2.5 points)
The 2012 Annual Demand is given as
Exhibit 5: Monthly Sales Data
Label Type
Ja
n
Fe
b Mar Apr
Ma
y June July Aug Sept
Oc
t Nov Dec
Year
Total
3Js Strawberry Jam
2012 345 301 325 299 344 296 329 334 349 325 289 333 3,869
2013 566 671 384 631 616 2,868
Marran
Markets
Raspberry Jelly
2012 229 270 236 279 273 255 236 232 235 276 244 241 3,006
2013 744 737 425 379 571 2,856
Kerry’s Marts Peach Jam
2012 156 176 174 144 160 178 155 159 178 166 176 148 1,970
2013 167 146 78 84 117 592
Dom’s Food
Stores
Blueberry Jam
2012 92 109 98 99 102 111 103 99 94 104 107 93 1,211
2013 100 99 80 139 108 526
AAA Grocers Apple/Mint Jelly
2012 66 77 79 69 65 66 68 67 62 74 71 68 832
2013 73 63 110 146 88 480
The EOQ and ROP quantities for the five SKU’s based on 2012 annual demand is given as
Total
Set up
cost (S)
Annual
Deman
d (D)
Carryin
g Cost
(i) %
Unit
Cost (C)
EOQ
(cases)
ROP
(cases)
Strawberry Jam 63.7 3869 9% 28.34 440 223
Raspberry Jam 63.7 3006 9% 30.52 373 173
Peach Jam 63.7 1970 9% 26.86 322 114
Page 1 of 12
Case Study 1 – Three Jays Corporation 831512392
Blueberry Jam 63.7 1211 9% 29.01 243 70
Apple/Mint Jelly 63.7 832 9% 26.32 212 48
As Demand increased from 2011 to 2012, the EOQ’s also increased
Deman
d (2010)
Deman
d (2012)
Increase
in
Demand
EOQ
(2010)
EOQ
(2012)
Increase
in EOQ
2993 3869 29.27% 387 440 13.70%
2335 3006 28.74% 329 373 13.37%
1492 1970 32.04% 280 322 15.00%
886 1211 36.68% 208 243 16.83%
625 832 33.12% 183 212 15.85%
So, if Annual Demand doubles, the EOQ will increase by sqrt(2)
2. Brodie is uncertain if the costs presented in case Exhibit 2 are appropriate for determining the
EOQs. What changes would you recommend, and why? Should the cost of the three idle part-time
workers be included when the production line is down? Using the 2012 annual demand, and your
recommendations, recalculate the EOQs for the five SKUs. (2.5 points)
In set up costs, the cost of part time workers should also be included, as they are idle at that time.
Assuming the salary of each part time worker to be half that of full time worker
So, Total salary of 3 part time workers, during idle time of 1 hour = 3*0.5*23.5 = $35.25
So, new set up cost = $63.7 + $35.25 = $98.95
In carrying cost, storage cost was considered as 0%, which should be more because, there is always an
opportunity cost of storing one inventory over another.
So, considering storage cost as 2%, new carrying cost = 6% + 2% + 3% = 11%
Some of the basic assumptions of EOQ are debated
• The demand is not uniform throughout the year, which may lead to stock outs
• The order of new batch takes time and is not done instantly. For this case, the ROP should be adjusted
to include the lead time to place order

Question25:

Introduction to the Study of Diversity in Organizations

 The study of diversity in organization  encom- passes many things, including differences based on race, culture, gender, sexual orientation, age, physical abilities, nation of origin, class, religion, and learning and communication styles.

Question 26:

 A CONCISE INTRODUCTION TO LOGIC HURLEY P.J


INSTRUCTIONS: The following selections relate to distinguishing arguments from nonarguments
and identifying conclusions. Select the best answer for each.
1. There appears to be a growing happiness gap between men and women. Women today are working
more and relaxing less, while men are working less and relaxing more. Forty years ago a typical
woman spent 40 minutes more per week than the typical man performing an activity considered
unpleasant. Today, with men working less, the gap is 90 minutes and growing.
a. Argument; conclusion: Today … the gap is 90 minutes and growing.
b. Nonargument.
c. Argument; conclusion: Forty years ago … an activity considered unpleasant.
d. Argument; conclusion: There appears to be … between men and women.
e. Argument; conclusion: Women today are working more and relaxing less.
ANS: D PTS: 2
2. Lead is toxic, but do you know why? Lead is toxic mainly because it preferentially replaces other
metals in biochemical reactions. In so doing it interferes with the proteins that regulate blood pressure
(which can cause development delays in children and high blood pressure in adults), heme production
(which can lead to anemia), and sperm production. Lead also displaces calcium in the reactions that
transmit electrical impulses in the brain, which diminishes the ability to think and recall information.
Anne Marie Helmstine, “Your Guide to Chemistry”
a. Argument; conclusion: It interferes with the proteins … and sperm production.
b. Argument; conclusion: Lead is toxic.
c. Nonargument.
d. Argument; conclusion: It preferentially replaces other metals in biochemical reactions.
e. Argument; conclusion: Lead also displaces calcium … recall information.
ANS: C PTS: 2
3. Aristotle focused on clarifying the concept of virtue itself. He argued that it was virtuous to choose the
proper amount of emotion and/or action called for in a particular situation and that extremes of
emotion and action were vices. In all communities there are some men of practical wisdom who have
the capacity to judge wisely. Aristotle argued that they have the capacity to follow the “right rule”
whatever the situation.
David Cooper, Value Pluralism and Ethical Choice
a. Argument; conclusion: In all communities … capacity to judge wisely.
b. Argument; conclusion: Aristotle focused on clarifying the concept of virtue itself.
c. Argument; conclusion: They have the capacity to follow … the situation.
d. Argument; conclusion: He argued that it was virtuous … were vices
e. Nonargument.
ANS: E PTS: 2
4. Illegal immigrants pay local sales taxes, and many of them also pay state, local, and federal income tax
and Social Security tax. They also purchase items from local merchants, increasing the amount these
merchants pay in taxes. In addition, they work for low salaries, which increases the earnings of their
employers and the amount of taxes these employers pay. Thus, it is not correct to say that illegal
immigrants contribute nothing to the communities in which they live.
a. Argument; conclusion: It is not correct to say … communities in which they live.

Question 27:

COUC 505 CHAPTER 10 MULTIPLE CHOICE EXAMINATION QUESTIONS

1. What is a therapeutic factor?
A. Common healing methods that underly different theoretical orientations
B. Skills and attitudes of the helper along with the client’s willingness to engage in the
therapeutic relationship.
C. Enhancing efficacy and self-esteem.
D. All of the above
2. Which are therapeutic factors mentioned in the text?
A. R= A Strong Helper-Client Relationship
B. T = Teaching Assertiveness Techniques
C. L- Lowering and Raising Emotional Arousal
D. Both A and C
3. Which of the following statements describe the REPLAN system?
A. It is unique in limiting the number of client goals.
B. It utilizes one or two therapeutic factors.
C. It designed to be most effective as a long-term approach.
D. It is a way of planning treatment by thinking about what the client is trying to achieve and
finding a technique to promote that goal.
E. All of the above.
4. What are the key components of self-esteem?
A. Defense mechanisms and self-worth
B. Self-worth and efficacy
C. Assertiveness and defense mechanisms
D. Efficacy and assertiveness
5. In the REPLAN System, P stands for:
A. Palliative methods
B. Productive Goals
C. Practicing New Behaviors
D. Producing Self-esteem
6. According to Albert Ellis (1973) which of the following are irrational beliefs?
A. The idea that it is catastrophic when things do not go the way one would like.
B. The idea that it is easier to avoid life’s challenges than face them.
C. The idea that certain people are evil and wicked and should be punished.
D. All of the above

Question 28:

Essentials Of Sociology 8th Edition By Weitz White – Test Bank 2021


1. When driving, we stop at a red light, whether or not a policeman is present. This is a form of:
a. internalized social control. c. externalization.
b. formal social control. d. anticipatory socialization.
ANS: A REF: 127 OBJ: 6.1
2. According to your text, effective social control is dependent primarily on:
a. self control and informal social controls. c. formal social controls.
b. self control and formal social controls. d. self control.
ANS: A REF: 127 OBJ: 6.1
3. Internalization occurs when:
a. a person exercises self-restraint because of fear of what others will think.
b. sanctions such as fines, expulsion, and imprisonment are used to enforce conformity.
c. illegal acts are avoided because of fear of getting caught.
d.
we don’t even think of violating the norms and values of our group because conformity is a
part of our self-concept.
ANS: D REF: 127 OBJ: 6.1
4. Alan, a 14-year-old boy, finds himself in a situation where he can steal a digital watch from K
Mart. He decides against the theft because he fears what others would think of him if they
found out. In this situation, Alan conforms to society’s values because of:
a. formal social controls. c. aversive social controls.
b. informal social controls. d. internalization.

Question 29:

Singapore University of Social Sciences SCO201 PCOQ01 Question bank 2 [ALL ANSWERED]

SOCIOLOGY C 273 Introduction to Sociology Study Questions With Answers

Essentials Of Sociology 8th Edition By Weitz White

SOCS 350 Week 8 Final Exam. Complete Solution

Question 30:

SOCS 350 Week 7 Course Project; Final Paper – Laws Regarding Same-Sex Marriages in Maryland

Ashford University – SOC 313 Week 4 Quiz 4. Complete Quiz. Graded A